Pelican-Hardigg Case Accesories

Some options are not available on all case sizes and availability is subject to change at manufacturer’s discretion. Case colors/options may differ slightly from printed versions.

Hover over each photo below for a detailed description.

Breather Valve

Breather Valve

Add a breather valve to make case waterproof.

Card Holder

Card Holder

Metal holder for shipping-card riveted to the exterior of case. Two sizes: 2-3/8″ x 5-3/8″ (60 x 136 mm) and 4″ x 6″ (102 x 152 mm).

Casters

Casters

Caster mounting system enhances the bottom panel strength of rack cases, while providing the same button release convenience of the FastClip mounting plate system found on Pelican’s single-lid cases. Available in removable or fixed 3.5″ or 5″ wheel diameters. Includes four casters, two machined aircraft aluminum extrusions, and mounting hardware installed on the case bottom.

Edge Casters

Edge Casters

Set consists of (2) caster/ wheel housings, permanently installed into the edge of the case shell. This option is available on a select list of single lid case sizes.

Certified Airtight

Certified Airtight

Includes PRV (pressure relief valve) and gasketing hardware to safely maintain correct pressure differential. Manual release button is recessed below cover rim. Test pressure range is +/- 0.25 PSID (18 mb).

Combination Lock

Combination Lock

3-Digit combination lock provides an integrated locking solution for Grab N’ Roll cases.

Custom Stenciling

Custom Stenciling

Per MIL-I-43553. Available colors are Black, White, and Yellow. Listed below are popular combinations of the case color along with the corresponding ink color. One ink color per case. If not specified Pelican will choose color. Pelican reserves the right to choose the stencil text or graphic size, font and location.

Extra Handles

Extra Handles

90° stop metal handles are rated to sustain 150 lbs. of lift. Available in plastic, zinc-plate yellow-chromate, ROHS compliant silver zinc, or stainless steel.

Flangemount Cases

Flangemount Cases

Features a molded-in shelf to support your panel-mounted gear. Threaded (1/4-20, UNC-2B threads) inserts in the flange allow easy panel fastening. Options include an aluminum mounting panel as well as a hinged aluminum panel in the case lid.

Forklift Bash Plates

Forklift Bash Plates

Protects base of container from impact caused during transport via Fork Truck

Forklift Provision Skid Runners

Forklift Provision Skid Runners

Features fork lift skids mounted to base of container. Provides clearance for forklift tines. Not available for all cases.

Front Labels

Front Labels

To assure that lids are replaced in the proper orientation. A set of two “front” labels is affixed to the case, one on the midsection and one on the lid.

Grab-n-Roll

Grab-n-Roll

Includes bumpers, telescoping handle and edge casters. (will add about 1 1/2″ on the height and about 1″ on the width. will add about 8lbs to weight of case).

Hinged Lid

Hinged Lid

Features hinges and butterfly latches. Quick ship cases come standard with cable lid stay.

Humidity Indicator

Humidity Indicator

Indicates 20%, 30%, and 40% relative humidity ranges. Three-part face changes color when inside humidity exceeds the indicated level. As humidity decreases, the indicator resets for future use. Recommended for airtight cases only.

ID Plate

ID Plate

I.A.W. MIL-P-15024, Type H, Style IV, Size 10.4 x 4.0 x .020″ (102 x 102 x 0.5 mm) thick aluminum, fastener attached to your case. Text font is News Gothic Bold.

Lift Rings/ Tie-down Rings

Lift Rings/ Tie-down Rings

Welded rings provide hoisting and tie-down attachment points with 2″ (51 mm) diameter clearance for hooks. They’re spring-loaded and pivot 180° . Available in plated steel or stainless steel.

Lockable Cable Catch

Lockable Cable Catch

Allows the case to be padlocked shut. Cable is tamper-resistant aircraft steel. Order two per lid. (Padlock not included.)

Lockable Padlock Hasp

Lockable Padlock Hasp

Allows the case to be padlocked shut. Order two for an all-catch lid. (Padlock not included.)

Stainless Steel Hardware

Stainless Steel Hardware

Upgrade – Standard zinc-plated yellow chromate hardware (catches, strikes, handles, hinges) is replaced by stainless-steel (clear passivated finish). Recommended for applications where standard zinc plate or zinc alloy finishes are not suitable, such as excessive saltwater or chemical environments.

Stainless Steel Black Finish Hardware

Stainless Steel Black Finish Hardware

Upgrade – Non-reflective hardware. Recommended for applications where the standard zinc-plate or zinc alloy finishes are unsuitable, such as excessive saltwater or chemical environments.

Standard ATA Labels

Standard ATA Labels

  • Up Arrows
  • Delicate unit
  • Handle with Care / Reusable Container